张旻，博士，毕业于大连理工大学，清华大学深圳研究生院副研究员。

2006年9月 大连理工大学博士毕业

2006年10月-2008年12月 清华大学精仪系博士后

2009年1月-2011年12月 美国明尼苏达大学博士后

2012年1月至今 清华大学深圳研究生院副研究员

主要从事微纳加工工艺的研究，采用自上而下(微加工工艺)与自下而上(自组装，原位生长等)相结合的方法，实现微纳器件的制备与功能化。重点研究基于电化学加工的新型微加工工艺，以及微纳连接技术，纳米材料制备与组装技术与金属氧化物薄膜沉积技术。

[1] Min Zhang, Taiho Yeom, Youmin Yu, Longzhong Huang, Terrence W. Simon, Mark T. North, Tianhong Cui.. Development of synthetic jet arrays for heat transfer enhancement in air-cooled heat sinks for electronics cooling. Proceedings of the ASME 2012 Summer Heat Transfer Conference, July 8-12, 2012, Rio Grande, Puerto Rico.

[2] Bo Zhang*, Min Zhang*, Tianhong Cui. Low-Cost Shrink Lithography with Sub-22 nm Resolution. Applied Physics Letters. 2012, 100, 133113. (*Co-first author) (Highlighted by Nature Materials 11, 358, 2012)

[3] Taiho Yeom, Terrence W. Simon, Min Zhang, Mark T. North, Tianhong Cui. High frequency, large displacement, and low power consumption piezoelectric translational actuator based on an oval loop shell. Sensors and Actuators A. 2012, 176, 99-109.

[4] Min Zhang, Tao Zhang, Tianhong Cui. Wettability conversion from superoleophobic to superhydrophilic on titania/single-walled carbon nanotube composite coatings, Langmuir. 2011, 27, 9295-9301.

[5] Min Zhang, Terrence W. Simon, Longzhong Huang, Vinnee Bharathi A. Selvi, Mark T. North, Tianhong Cui. A polymeric piezoelectric synthetic jet for electronic cooling, Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE 2011, November 11-17, 2011, Denver, Colorado, USA..

[6] Bo Zhang, Min Zhang, Tao Zhang, Tianhong Cui. Enhanced capillary in microchannels coated with nanoscale porous titanium dioxide. Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE 2011, November 11-17, 2011, Denver, Colorado, USA.

[7] Min Zhang, Bo Zhang, Tianhong Cui. Synthesis of ultra-thin superhydrophilic titanium oxide film and its effects on the capillary of microchannels. Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition, IMECE 2010, November 12-18, 2010, Vancouver, British Columbia, Canada.

[8] T. Zhang, M. Zhang, T. Cui. Microfluidic valves based on TiO2 coating with tunable surface wettability between superhydrophilic and superhydrophobic. TRANSDUCERS 2011, 306-309, 2011, Beijing, China.

[9] Min Zhang, Dongming Guo, Zhuji Jin. EDM performance of electroformed Cu-ZrB2 shell electrodes, Rapid Prototyping Journal. 2009, 15(2), 150-156.

[10] Min Zhang, Zhaoying Zhou, Xing Yang, Xiongying Ye. Pinning of single-walled carbon nanotubes by selective electrodeposition, Electrochemistry Communications. 2008, 10, 1559-1562.

[11] Min Zhang, Zhaoying Zhou, Xing Yang, Xiongying Ye, Zhong Lin Wang. Fabrication of ZnO nanowire devices by selective electrodeposition, Electrochemical and Solid-State Letters. 2008, 11(9), D69-D71.

[12] D.M. Guo, M. Zhang, Z.J. Jin, B.X. Zuo. Particle strengthening of the surface of copper electrode for electrical discharge machining, International Journal of Materials and Product Technology. 2008,31(1),81-87.

[13] Dongming Guo, Min Zhang, Zhuji Jin, Renke Kang. Effect of direct current and pulse plating on the EDM performance of copper-zirconium diboride composites, Journal of University of Science and Technology Beijing.2007,14(5),464-468.

[14] Dongming Guo, Min Zhang, Zhuji Jin, Renke Kang. Effects of chloride ion on the texture of copper and Cu-ZrB2 coatings electrodeposited from copper nitrate solution in different plating modes，Journal of materials science & technology. 2006,22(5), 643-646.