应用介绍
MicoConnect允许你控制任何投影机的参数，如亮度，对比度或伽玛，但也获得有价值的信息，从投影机的状态或重要的数据，如设备的序列号或固件版本。 如果你正在寻找一个简单而智能的应用控制MICO ， MicoConnect将是一个真正的优势和一个伟大的解决方案！ 它能做什么？ MicoConnect将帮助您轻松控制所有的参数，点击几下： MicoConnect设有9个主菜单： 1。遥控器：模拟遥控钥匙SIM2 2。 IMAGE ：设置亮度和对比度并选择源，图像伽玛校正和影院模式 3。颜色：设置初选，白点，显示模式和动态黑色。手动调整白点的坐标使用的用户选项。 4 。镜头设置：调节变焦，聚焦和镜头位移（垂直和水平） 5。 ASPECT设置：选择图像宽高比5前缀的方面，或在一组选择3用户方面调整您的首选之一。 6 。梯形校正设置：调整水平和垂直梯形设置。 7。回忆：保存，选择和重命名的回忆。你有25个不同的存储器来保存您的首选设置。 8。投影仪信息：检查投影机的主要信息，如产品序列号，工作状态，信号状态，输入选择，主动记忆，图像参数和固件版本。 9。设置：启用或禁用应用程序声音和翻页。将投影机的IP地址和一个日志文件发送到您所需的服务接触。Do you want to control your SIM2 MICO projector simply by a touch of a finger MicoConnect allows you to control any projector’s parameter like brightness, contrast or gamma but also to receive valuable information from the status of the projector or important data like unit’s serial number or firmware version. If you are looking for an easy and smart application to control the MICO, MicoConnect will be a real advantage and a great solution! What it does: MicoConnect will help you to easy control all parameters in few clicks: MicoConnect features 9 main menus: 1. REMOTE CONTROL: emulates the SIM2 remote control keys 2. IMAGE: set brightness and contrast and select the source, the image gamma correction and the cinema mode 3. COLORS: set the primaries, the white point, the display mode and the Dynamic Black. Adjust manually the coordinates of white point using the user option. 4. LENS SETUP: adjust Zoom, Focus and lens shift (vertical and horizontal) 5. ASPECT SETUP: select the image aspect ratio among a set of 5 prefixed aspects or adjust your preferred one choosing one of the 3 user aspects. 6. KEYSTONE SETUP: adjust the keystone setting horizontally and vertically. 7. MEMORIES: save, select and rename memories. You have 25 different memories to save your preferred settings. 8. PROJECTOR INFO: Check the main projector information like product Serial Number, working status, signal state, input selected, active memory, image parameters and firmware’ versions. 9. SETTINGS: enable or disable the application Sounds and the page flip. Set the projector IP address and send a log file to your desired service contact.