输胶管是一种医疗器械。

铁弗龙管（四氟管） 内径：8MM

胶管（成品）外径:450MM

电力需求：交流220伏 50HZ　功率：165W/米

感温类型：K型热电偶

最大弯曲半径：20cm

可承受温度：Max250度

外接温控表要求

控制输出：继电器ON/OFF控制 热电偶K型

Main Technical PARAMETERS

1、内胆采用进口的铁氟龙管，具有良好的柔性、防粘性及耐高温性(最高可达250度)，可大大减少炭化现象；

2、加热器采用美国的加热丝及耐高温线，均匀地缠绕在喉管外壁，具有良好的绝缘性及均匀导热、耐高温性能：

3、采用高质量的保温材料，确保喉这保温性能。

4、良好的弯曲性能、耐折性能，依托于优质的材料(折不断的加热丝及耐高温线)、合理的加工工艺设计，其最大弯曲半径可达20cm。

5、长度及其它相关参数可按客户需求制造。

1. Its liner equipped with the imported Teflon hose has

find performance of flexibility,anti-sticking and high-temperature resistance (can reach as high as 250 degrees) so as to reduce the charring greatly.

2. The heater adopts the heating wires and the high-temperature resistance wire from U.S. which wind the outer wall of the hose evenly showing its fine perfomance in insulation, even thermal conduction and high-temperature resistance.

3. High-quality heat insulating matedal is adopted to ensure the heat insulation of the hollow throat.

4. Its fine performance of bending and folding depends on the quality material (unbroken heating wires and high-temperature wires) and reasonable processing technology to reach the maximum bending radius at 20 cm.

5. The length and other related parameters can be tailored per the customers' requirement